Touch Pro and Link Pro are the entry points into the ClaroWatt Ecosystem Network — a living platform that supports inverters, batteries, shunts, solar generators, and anything that moves power through a US residential system.
Every ClaroWatt device connects automatically to every other device on the Ecosystem Network. No cables between devices, no cloud required, no setup ritual.
The largest solar display in the industry — 10.1 inches of live data, Sunny AI on-device, and Home Assistant native. Wall, desk, or nightstand. It reconnects automatically wherever you plug it in.
Your inverter speaks RS-485. Your battery speaks CAN. Link Pro speaks both — and everything else — then forwards it wire-free to Touch Pro and Sunny over the ClaroWatt Ecosystem Network.
The ClaroWatt Ecosystem Network isn't two products talking to each other — it's a platform. It supports inverters, batteries, shunts, solar generators, and any Modbus device in your system. All visible, all connected, all in Home Assistant.
Split-phase limiter support for the full range of US residential grid-tie inverters. Single-phase OEM meter is the problem. ClaroWatt is the fix.
Battery voltage, state of charge, charge/discharge current, and cycle data on the Ecosystem Network. Visible on Touch Pro and in Home Assistant.
500A shunt monitoring with coulomb counting for real battery state of charge. The number your BMS gives you is optimistic. A shunt is honest.
Portable power stations and solar generators visible on the Ecosystem Network. Know your state of charge, input watts, and output before you need it.
Every device on the Ecosystem Network is a native HA entity. No YAML. No custom integrations. One-click discovery. Full Energy Dashboard support.
If it speaks RS-485 Modbus, the Ecosystem Network can see it. Open protocol, open integration. Your existing equipment doesn't need to be replaced.
Clip around your service conductors, plug directly into Link Pro, and you're done. No panel work, no disconnecting wires, no electrician. Handles residential service up to 400A.
Split-core hinged design installs without disconnecting conductors. Ships as a matched pair — CT1 and CT2 labeled, load direction marked — with direct plug-in to Link Pro. No adapter, no wiring, no guessing.
Need 3-phase monitoring? Contact us or ask Sunny — we support it.
Sunny can confirm compatibility with your specific inverter or system. Ask Sunny →
Your LiTime BMS gives you a 2-inch LCD. Your SOYO inverter gives you a small numeric display. Touch Pro gives you 10.1 inches of live data, Sunny AI, and Home Assistant — readable across the room, not just while you're crouching in front of the equipment.
| Feature | Touch Pro | Link Pro |
|---|---|---|
| Split-phase monitoring | ✓ | ✓ |
| ClaroWatt Ecosystem Network | ✓ | ✓ |
| Home Assistant integration | ✓ | ✓ |
| Sunny AI assistant | On-device — tap or voice | Via Touch Pro or HA |
| Display | 10.1” IPS soft-touch | 4-digit LED |
| RS-485 / Modbus RTU | — | ✓ |
| CAN bus | — | ✓ |
| Victron wireless native | — | ✓ |
| Inverter limiter port | — | Compatible |
| Portable — move room to room | Yes — auto-reconnects | Fixed install |
| Best for | Whole-home display, Sunny AI, daily visibility | Wireless protocol bridge — RS-485, Modbus, CAN, Victron — to the Ecosystem Network |
Every install you do with ClaroWatt gives your customer a system that actually reads their split-phase service correctly. That's a conversation every solar homeowner on US residential power should be having. Be the one having it.